Ring Binders & Tabs Specialty Packaging Presentations Wire & Plastic Binding Laminating Equipment Supplies & Service

Our Word Is Binding Since 1946 2323 – 3 ^rd Avenue / Seattle ,  Washington    98121 Phone (206) 443‑9424   FAX (206) 443‑1018   E‑mail: binditup@binderproducts.com

Laminating Equipment and Supplies

	Banner American PL4A Our Pouch Laminators are ideal for laminating ID cards and badges, membership cards, luggage tags, etc. · Width Capacity: 3 3/4" (9.63 cm) · Dimensions: 8"L x 10"W x 3 3/4"H (20.32 cm x 25.40 cm x 9.53 cm) · Net Weight: 7 3/4 lbs. (3.49 kilograms) · Shipping Weight: 9 lbs. (4.05 kilograms) · Power Requirements: 120 VAC
	Banner American PL12A Our Pouch Laminators are ideal for laminating ID cards and badges, membership cards, luggage tags, etc. In addition to cards, the PL12A laminator will laminate larger documents up to 12" (30.48 cm) width. All of our laminators, from our lowest cost home laminator, to our top end heated roller model, are manufactured and assembled with care and pride. Our mission is to deliver a quality product to you that will meet your needs at a price you can afford. · Width Capacity: 12 1/4" (31.12 cm) · Dimensions: 8 1/2"L x 19"W x 4 1/8"H (21.59 cm x 48.26 cm x 10.48 cm) · Net Weight: 15 1/2 lbs. (7.04 kilograms) · Shipping Weight: 21 1/2 lbs. (9.76 kilograms) · Power Requirements: 120 VAC, 50/60Hz, 820 watts
	ALM3220 Auto Laminator The ALM3220 is a breakthrough in laminating technology. Laminating has never been so fast and easy. Fujipla's revolutionary compact auto laminator is as easy to use as a copy machine and warms up in 5 minutes. Just load from 1 to 200 documents in the automatic feeder and press the start button. Each document is automatically fed into the laminator, laminated with the special lamination film, trimmed to size and then stacked on the collection tray. The ALM3220 can adjust to different size documents up to 12” x 18” and can adjusted to trim with or without a margin. The special AL laminating film comes in 1.5, 3 or 5 mil thickness in gloss or matte finish. • Small foot print - less than 3 sq. ft. • Portable - locking roller casters • Ultra quick warm up of less than 5 minutes • Automatically feeds up to 200 sheets • Automatic two side lamination • Limited one-year warranty.
	H600pro High-performance: 13"Throat If you're looking for a professional system that can handle large and standard items up to 13" wide, the H600pro is for you. It's ideal for all of your presentations, signs, menus and certificates. And, with six speeds and four rollers (hot rollers), you'll get bubble-free results every time. • Laminates .10" mounting boards. • One-touch keypad with LCD readout. • Adjustable temperature with cooling fans. • Reverse function. • Jam release switch. • Uses up to 10 mil pouches. • Photo quality. • Limited one-year warranty.
	H700pro Multifunctional: 18"Throat This versatile, high-volume system is perfect for offices that need to laminate oversized items, such as banners, posters and mounted signs up to 18" wide. It has nine speeds and four rollers(hot rollers), so you're sure to get the smoothest, glossiest results. • Laminates .10" mounting boards. • One-touch keypad with LCD readout. • Adjustable temperature with cooling fans. • Reverse function. • Jam release switch. • Uses up to 10 mil pouches. • Photo quality. • Limited one-year warranty.
	Banner American AP-1 The AP-1 is perfect for cutting photos to 1" x 1 1/4" for ID cards and passes. It gives a smooth edge with rounded corners each and every time.
	the Educator 25–inch School Laminator Ledco asked teachers and media specialists what they wanted to see in a laminator and that's what they told us. So that's what Ledco designed into the Educator. They started with the Graphic III and Premier III machines that so many schools have learned to know and trust for their laminating quality and trouble-free operation. Then they simplified the controls and created an improved film path to eliminate many of the operator errors common to thermal laminators. Posters, dry erase charts, flash cards, bulletin board graphics, games, visuals and teaching aids of all kinds represent a tremendous investment, whether they were purchased, or made by teachers. Protecting and enhancing these educational materials with lamination allows them to last for years instead of being replaced every few weeks or months.
	Banner American MightyLam 2700 It's the ultimate production solution (and profit center) for commercial print shops, copy shops, service centers, sign shops, in-house graphics departments, and more. High on productivity, low on cost the MightyLam 2700™ offers advantage features, such as: capability to laminate from .0015" to .010" gauge film and mount materials up to 3/16" thick, simplified, easy-to-set heat controls, and a variable speed control for operating at any speed up to 10 feet per minute. · Attached safety shield. Drop-down bottom idler for easy loading. · Teflon coated heat shoes. Silicone laminating rollers. · Reverse switch. Adjustable slitters. Heavy-duty DC motor. · Forced air cooling. Adjustable heat control. Built-in LCD readout. · Adjustable supply roll tension. Variable speed control. Mount capability up to 3/16".
		PREMIER 4 25–inch Commercial Laminator

The Premier 4 represents an evolution in mid-range commercial laminators, because it includes so many features not available on other laminators at any price. Whether it's judged by appearance, by ease of use, by reliability, by the finished lamination, or by overall capabilities, the Premier 4 represents quality and versatility.

Commercial users must have that quality to help them satisfy their customers. The Premier 4 was made for copy shops, print shops, business service centers, laminating services, school supply stores, sign/banner shops, in-house graphics departments, 24-inch color inkjet owners, and other commercial users with similar needs.

Standard Features

· Variable Speed. Operates at any speed up to 10 feet per minute. Thicker films are generally applied better at mid-range to lower speeds, while 1.5 mil film should be applied at mid-range to higher speeds.

· Digital LCD temperature display. Makes it easy to set and maintain the correct temperature. The indicator light inside the heat switch comes on as the machine warms up; at set temperature the indicator light turns off.

· Simple controls. Conveniently placed switches provide a compact, reliable control pad. Icons and international symbols are used for controls and safety warnings.

· Slitters. Experts know the value of slitters for laminating a quantity of same-size sheets. The slitters remove the side scrap from both sides of each sheet as it goes through the laminator. This greatly reduces the amount of time required for trimming.

· Swing-away heat shoes. This helpful feature makes it much easier to clean the laminating rollers. The Premier 4 is the only machine in its class to have swing-away heating.

· Easy threading. Threading can be the most difficult aspect of using a laminator, so the Premier 4 has built-in threading aids. The top idler is guarded from the top heat shoe for safety and easy threading. The bottom idler is attached to the feed tray. Once the upper and lower webs of film have been run through the machine, bottom idler threading is automatic when the operator puts the feed tray on the machine.

· Forced air cooling. Allows laminating with thicker films. Without a cooling system, thicker films will warp or ripple because they are still too hot when they come out the back of the laminator. The Premier 4 has a more effective cooling system than any other machine in its class. There are four fans in a 25-inch machine.

· Ease of cleaning. The silicone rubber rollers and the teflon-coated heat shoes of the laminator should be cleaned regularly. The heat shoes on the Premier 4 swing away in seconds, making it far easier to clean the laminating rollers.

· Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat, protecting them from hot areas. It's fixed to the machine and placed so they'll naturally put it in the guard position before laminating.

· Supply roll tension controls. Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.

· Ease of maintenance. The premier 4 is made to last. However, some items on a laminator do wear out. Even the high-quality silicone rubber used in the rollers loses flexibility over time. Extensive use may wear out the rollers or an operator may cut a roller by accident. Rollers and other key parts can be changed quickly without disassembling the frame.

· Reverse. Can be invaluable at times to help avoid problems or remove misfed material.

· Right and left adjustable feed guides.

· 100% Made in the U.S.A. One-year warranty.

Digital 42 & 60 Laminators User-Friendly Big Format Laminating and Mounting

These 42 and 60-inch wide machines were the first designed exclusively for the owners of 36 and 50 inch inkjet printers. They do all the finishing tasks required of a large format imaging shop - laminating one side or two, encapsulating, mounting with heat activated (dry mount) or cold pressure-sensitive adhesives (PSA), simultaneous mounting and laminating, and application of cold adhesives. These machines were made to be very easy to use, incorporating many of the glitch-proof features we developed over 40 years of making laminators for schools and commercial finishing shops. These units will laminate one item, then mount and laminate the next in one pass on mounting board up to 1/2 inch thick. No setup change is needed. In fact, you can laminate one item, then mount and laminate the next in one pass without even stopping the machine. With a top speed of 30 FPM and a sustainable laminating speed of 10 FPM with 5-mil film, the Ledco Digitals are much faster than the other machines made for big format color applications. An optional release liner takeup allows the Digital 42 & Digital 60 to apply cold laminating films, vinyls and other PSA materials needing removal of a liner. Standard features on both machines include variable speed, independent top and bottom heat control, spacious feed tray, powerful film cooling system, and swing-away heating units for cold applications and easy cleaning of the rollers. Ledco's new patented ThermoGlide TM option is available on both units. ThermoGlide TM combines the best features of hot shoes and hot rollers to produce the next generation of thermal laminating technology. Ledco is known for making machines that are very reliable, easy to use, and inexpensive to maintain. These units maintain that reputation. They come with a one-year factory warranty. They are shipped fully assembled with a helpful operator's manual and a 90-minute instructional videotape. Ledco provides a toll-free help line to back up the training and support required of its dealers. Customers are encouraged to call so that small problems do not become big ones. Standard Features and Benefits · Quality Silicone Rubber Laminating Rollers - release materials easily and maintain their flexibility for a good edge seal. · Interchangeable Laminating Rolls - Allow the laminating rolls to be replaced with the pull rolls. If the heated rubber rolls found on competitive laminators become nicked, they require a costly replacement and down time. · Supply Roll Tension - is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels. · Variable Speed - allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds. · Independent Temperature Controls - for top and bottom heaters allow the use of different materials on front and back of an image. · Large Feed Tray - makes it easier to handle big graphics. The pressure strip next to the nip helps keep images flat and wrinkle-free. · Swing Away Heaters - make it very easy to clean the laminating rollers and simplify the use of many cold materials. · Made In the USA

MANY OTHER MODELS AVAILABLE

Binder Products Inc.

Phone (206) 443‑9424

FAX (206) 443‑1018

E‑mail: binditup@binderproducts.com

We Service What We Sell

Near the Seattle Monorail and Space Needle

<HOME>